Auto Meter 5” Monster Tachometers - Denunzio Racing Products

<strong>Auto</strong> <strong>Meter</strong><br />

5” <strong>Monster</strong> <strong>Tachometers</strong><br />

Sized extra large for fast, easy reading, the <strong>Auto</strong><br />

<strong>Meter</strong> Sport-Comp series <strong>Monster</strong> tachometers<br />

feature air core meter movement and electronic<br />

circuitry for accuracy and fast response. Adjustable<br />

red pointer puts the redline where you need<br />

it, and rubber mounting strap absorbs the shock<br />

that off-road racing dishes out.<br />

103-3900 10,000 RPM Tachometer<br />

103-3980 8,000 RPM Tachometer<br />

Pro-Lite Warning Light<br />

For times when there are other things on your mind<br />

than watching your gauges, Pro-Lites can give you<br />

crucial, timely warnings. Light comes with red bulb<br />

and night cover<br />

103-3240 Pro-Lite<br />

103-3241 Sender 15PSI<br />

103-3242 Sender 30PSI<br />

103-3243 Sender 50PSI<br />

103-3246 Sender 187°-203°F<br />

103-3247 Sender 210°-230°F<br />

103-3248 Sender 275°-295°F<br />

103-3250 Blue Lens & Cover Kit<br />

103-3251 Yellow Lens & Cover Kit<br />

103-3262<br />

103-5215<br />

<strong>Auto</strong> <strong>Meter</strong> Accessories<br />

103-5230 In-Dash Mounting Adapter<br />

103-3262 Fuel Level Sender<br />

For 103-2516, -3516, -5417 Fuel Gauges<br />

103-5215 BEI/Laser Adapters<br />

Enables any current <strong>Auto</strong> <strong>Meter</strong> Tachometer to<br />

be used with Accel BEI and Laser I & II Ignitions.<br />

58<br />

800-622-3939<br />

Tech Line: 805-683-1211<br />

www.denunzioracing.com

---

<strong>Auto</strong> <strong>Meter</strong> 2” Electrical Gauges<br />

The 2” chrome-bezel Performance Series guages come<br />

with all necessary senders and provide easy panel<br />

mounting. All have an easily-read short-sweep dial design<br />

and an air core meter.<br />

103-2514 Fuel Level (0 Empty/90 Full)<br />

103-2515 Fuel Level (73 Empty/8-12 Full)<br />

103-2516 Fuel Level (240 Empty/33 Full)<br />

For use with 103-3262 Sending unit (not included)<br />

103-2517 Fuel Level (0 Empty/30 Full)<br />

Empty and Full values are in Ohms<br />

103-2522 Oil Pressure 0-100PSI<br />

Includes electric sender, 1/8” and 1/4” NPT fittings<br />

103-2532 Water Temperature 100°-250°F<br />

103-2542 Oil Temperature 100°-250°F<br />

103-2543 Oil Temperature 140°-300°F<br />

The temperature gauges listed above include a 1/8”<br />

electric sender, 3/8” & 1/2” NPT fittings.<br />

For use only with alternators of 60 amp or less max.<br />

output. Higher output applications must use Voltmeter.<br />

103-2592 Voltmeter 8-18 Volts<br />

2” Mechanical Gauges<br />

These gauges feature a 270° dial sweep and are designed<br />

to be panel mounted. All have chrome bezels.<br />

103-2411 Fuel Pressure 0-15 PSI (Carbureted)<br />

103-2412 Fuel Pressure 0-100 PSI (Fuel Injected)<br />

Gauges must be mounted outside the vehicle. Requires<br />

braided stainles steel tubing & Mounting Cups.<br />

For in-cab mounting, use pressure isolator # 103-5230<br />

103-2413 Fuel Pressure 0-15PSI w/ Isolator<br />

May be installed inside vehicle by mounting isolator<br />

in engine compartment. Includes 4’ braided steel line<br />

for linking isolator to gauge.<br />

103-2421 Oil Pressure 0-100 PSI<br />

103-2422 Oil Pressure 0-200 PSI<br />

Both of the above include 1/8” and 1/4” NPT fittings<br />

and 6’ of nylon tubing.<br />

103-2431 Water Temperature 140°-280°F (6’)<br />

103-2432 Water Temperature 120°-280°F (6’)<br />

103-2433 Water Temperature 120°-240°F (12’)<br />

The above gauges have a 1/2” NPT fitting with the<br />

noted amount of capilary tubing.<br />

103-5784 Vacuum 30in. Hg.<br />

Includes 6’ of nylon tubing and universal T-fitting.<br />

800-622-3939<br />

Tech Line: 805-683-1211<br />

www.denunzioracing.com<br />

59

---

<strong>Auto</strong> <strong>Meter</strong> Pro-Comp 2-5/8” Liquid-Filled Mechanical Gauges<br />

The Pro-Comp Series of liquid-filled gauges is designed<br />

for high-vibration and violent pounding auto racing applications.<br />

The bourdon tube gauge mechanism is encased<br />

in dampening fluid. This protection provides steadiness to<br />

the pointer as well as lengthening gauge life.<br />

103-5411 Fuel Pressure 0-15PSI<br />

103-5412 Fuel Pressure 0-100PSI<br />

These gauges must be mounted outside the vehicle, and<br />

require stainless steel braided line and mounting cups.<br />

103-5413 Fuel Pressure w/ Isolator 0-15PSI<br />

May be mounted inside the vehicle. Includes 4’ of braided<br />

hose to run from isolator to gauge. Other braided hose<br />

and mounting cups not included.<br />

103-5421 Oil Pressure 0-100PSI<br />

103-5422 Oil Pressure 0-200PSI<br />

Gauges include 1/8” & 1/4” NPT fittings and 6’ of nylon<br />

tubing.<br />

103-5423 Pressure 0-200PSI<br />

Requires stainless steel Braided line (not included).<br />

103-5431 Water Temp. 140°-280°F (6’)<br />

103-5432 Water Temp. 120°-240°F (6’)<br />

103-5433 Water Temp. 120°-240°F (12’)<br />

Temperature gauges include a 1/2” NPT fitting with the<br />

noted length of capilary tubing.<br />

103-5884 Vacuum 30in. Hg.<br />

Includes 6’ of nylon tubing and a universal T-fitting.<br />

Specifications:<br />

Liquid<br />

2-3/16”<br />

Case<br />

2-5/16” Deep<br />

LIQUID-FILLED<br />

MECH. GAUGES<br />

Gauges fit into 2-5/8”<br />

dia. hole & include 12V<br />

Lighting Hardware<br />

Fuel Pressure Gauge w/ Isolator allows<br />

mounting in vehicle’s interior without danger<br />

of fuel entering the driving compartment.<br />

<strong>Auto</strong> <strong>Meter</strong> Pro-Comp 2-5/8” Liquid-Filled Electrical Gauges<br />

These electrical gauges are made to the same exacting<br />

standards as the mechanical gauges, but are<br />

ideal for applications where routing electrical wires<br />

instead of tubing is preferred.<br />

103-5415 Fuel Level (0 Empty/90 Full)<br />

103-5416 Fuel Level (73 Empty/8-12 Full)<br />

103-5417 Fuel Level (240 Empty/33 Full)<br />

For use with 103-3262 Sending unit, not included.<br />

103-5427 Oil Pressure 0-100PSI<br />

103-5437 Water Temp. 100°-250°F<br />

103-5447 Oil Temp. 140°-300°F<br />

Temp. gauges include 1/8” electric sender and<br />

1/4” NPT fitting.<br />

103-3586 Ammeter 60-0-60 Amps<br />

For use on altenators with max. output of 60 amps or<br />

less. Higher output applications must use voltmeter.<br />

103-5492 Voltmeter 8-18 Volts<br />

60<br />

800-622-3939<br />

Tech Line: 805-683-1211<br />

www.denunzioracing.com

---

<strong>Auto</strong> <strong>Meter</strong> 2-5/8” Sport-Comp Electrical Gauges<br />

The Sport-Comp series of electrical gauges features an<br />

air core meter movement for reliability and accuracy. Full<br />

pointer design allows fast reading in any racing condition.<br />

103-3514 Fuel Level (0 Empty/90 Full)<br />

103-3515 Fuel Level (73 Empty/8-12Full)<br />

103-3516 Fuel Level (240 Empty/33 Full)<br />

For use with 103-3262 Sending unit (not included).<br />

103-3517 Fuel Level (0 Empty/30 Full)<br />

103-3262 Fuel Level Sending Unit (240 Empty/33 Full)<br />

Empty and Full values are in Ohms.<br />

103-3522 Oil Pressure 0-100PSI<br />

Includes electric sender, 1/8” and 1/4” NPT fittings.<br />

103-3531 Water Temperature 100°-250°F<br />

103-3536 Cylinder Head Temperature 140°-300°F<br />

103-3542 Oil Temperature 100°-250°F<br />

103-3543 Oil Temperature 140°-300°F<br />

Temperature gauges listed above include 1/8” electric sender,<br />

3/8” & 1/2” NPT fittings (except 103-2536, no fittings included).<br />

103-3592 Voltmeter 8-18 Volts<br />

<strong>Auto</strong> <strong>Meter</strong> 2-5/8” Sport-Comp Mechanical Gauges<br />

For more than 25 years, the Sport-Comp has set the standard<br />

by which other racing gauges have been judged. They feature<br />

a unique competition design, 270° sweep faces, and rugged,<br />

prescision engineered mechanisms for long life and accuracy.<br />

103-3411 Fuel Pressure 0-15PSI<br />

103-3412 Fuel Pressure 0-100PSI<br />

These require stainless braided line and mounting cups.<br />

They must be mounted outside the vehicle unless high pressure<br />

isolator 103-528 is used.<br />

103-3413 Fuel Pressure W/ Isolator 0-15PSI<br />

May be installed vehicle with isolator mounted in engine compartment.<br />

4’ of stainless braided line is incuded for connecting<br />

isolator to gauge. Other lines and mounting cups not included.<br />

103-3421 Oil Pressure 0-100PSI<br />

103-3422 Oil Pressure 0-200PSI<br />

Both include 6’ of nylon tubing and 1/8” & 1/4” NPT fittings.<br />

103-3431 Water Temp. 140°-280°F (6’)<br />

103-3432 Water Temp. 120°-240°F (6’)<br />

103-3433 Water Temp. 120°-240°F (12’)<br />

103-3435 Temperature 140°-340°F (6’)<br />

103-3441 Temperature 140°-280°F (6’)<br />

103-3443 Temperature 140°-280°F (12’)<br />

Temperature gauges include a 1/2” NPT fitting with the noted<br />

length of capillary tubing.<br />

103-5884 Vacuum 30in. Hg.<br />

Includes 6’ of nylon tubing and a universal T-fitting.<br />

800-622-3939<br />

Tech Line: 805-683-1211<br />

www.denunzioracing.com<br />

61